Preparing Automatic Repair Issue Still After Hard Drive Changed but facing same issue ???

on

 


This issue is causes multiple reasons like below :

  • Laptop or desktop power off directly or power cut.
  • Windows Registry Problem.
  • Windows update not properly installed.
  • Boot-Manager fail.
  • After update missing or damaged system files.
  • Problem with Hardware drivers.
  • Processor FAN fail.
  • Hard-Drive RPM problem.
  • Laptop battery problem.
Their is lot of issue even am not mentioned it all because of multiple reason we getting this issue not any specific we get. If you replace the hard drive because of the RPM problem and still you are facing the same issue then need to follow this steps:

  1. Connect your hard drive to other system or use external case to take backup the data files
  2. While data backup time you are getting any dump error or blue screen issue with the other system then confirmand the hard drive is problematic.
  3. After backup done check the hard drive health their is lot of free application to check the hard drive health.
  4. If your hard drive is good then ok otherwise need to change the hard drive.
  5. Change the thermal colling on processor some time processor get heat-up and system power off directly.
  6. Check the Battery connection with motherboard if the port is rusty then clean it with blade.
  7. Disconnect all the hardware once and re-connect it properly.
  8. Create a bootable device and re-install the windows.
  9. After installing windows have to create 1 system restore point that will help you to recovery of OS.
  10. This all steps help you to solve this problem presently.


Comments

Post a Comment